Keep your Comco AF10 Accuflo running smoothly and efficiently with minimal maintenance and by replacing worn out parts.
We stock a wide range of common spare parts for the Comco range of Accuflo blasters. We also keep nozzles and commonly used abrasive powder in stock. We have been selling the Comco range of abrasive blasting equipment for over 40 years and can help assist with any problems you may have.
See below to obtain quotes or information on the commonly used spares for the Comco Accuflo.
Please have a look here (Diagram of Comco AF10) if the parts you need are not listed below.
For other Comco spares and maintenance kits, please see our Comco spares page.
MB2247 Accuflo Maintenance kit for 1/4" output fitting. Includes: 1 x MB1653 Powdergate Nose 1 x MB2560-3 PowderGate output fitting (1/4") 1 x ST5650-242 O-ring (for serial numbers up to #130)
MB2247-2 Accuflo Maintenance kit for 1/4" output fitting. Includes: 1 x MB1653 Powdergate Nose 1 x MB2560-3 PowderGate output fitting (1/4") 1 x ST5650-242 O-ring (for serial numbers from #131+)
MB2247-3 Accuflo Maintenance kit for 3/8" output fitting. Includes: 1 x MB1653 Powdergate Nose 1 x MB2560-4 PowderGate output fitting (3/8") 1 x ST5650-242 O-ring (for Serial numbers up to #130)
If you have any problems with the machine or would like any advice, we are happy to give support and help to get you back and running with as quickly and possible. Please feel free to call us on +44 (0)1460 61791 or Email: support@epakelectronics.com. If you can advise us on the model, serial number and any details relating to the problem it will help speed up your enquiry.
© 2014 All rights reserved. | Design by TEMPLATED.