For the best microblasting results, your abrasive powder needs to be dry and the compressed air supply feeding your microblaster also needs to be dry. Damp powder will cause many issues including intermittent powder flow, poor consistency in blasting and can even cause blockages in the tank, nozzle or mixing chamber. The simplest way to avoid these problems is to use an air dryer with an oil filter. This will remove oil and moisture from your air supply and will help keep your powder dry.
The oil filter is placed before the desiccant filter to absorb the heavier oils from the compressed air supply and then the silica gel desiccant beads absorb any moisture at flow rates up to 7.5 SCFM.
The AD5100 requires no power to function, but will periodically need the desiccant changed as once it becomes saturated with moisture over time.
The desiccant used turns from orange when new to a green colour when they become saturated with moisture. The new orange-to-green desiccant beads are safe for use in any Comco desiccant air dryer and are an acceptable replacement for those currently using blue-to-pink beads. Replacement charges of desiccant beads are Comco Part No. ST6104-4
For other Comco spares and maintenance kits, please see our Comco spares page.
If you have any problems with the machine or would like any advice, we are happy to give support and help to get you back and running with as quickly and possible. Please feel free to call us on +44 (0)1460 61791 or Email: support@epakelectronics.com. If you can advise us on the model, serial number and any details relating to the problem it will help speed up your enquiry.
© 2014 All rights reserved. | Design by TEMPLATED.