HANDHELD DRAWDOWN TOOL low cost precision holder for testing inks, paints, emulsions, adhesives and chemicals

Handheld Manual Drawdown Rod and Holder

Wire-Wound Drawdown Rod Holder - a low cost, 200mm precision drawdown tool for testing inks, paints, emulsions, adhesives and chemicals.

The NEW N008-203 Handheld Drawdown is a low cost precision drawdown tool for testing inks, paints, emulsions, adhesives and chemicals in the laboratory, on the plant floor or in the field.

The roller frame is made from stainless steel construction will not rust or corrode. THe wooden handle is comfortable and light weight. Quick one hand operation provides a full 200mm wide drawdown path of controlled coating thickness. Easy to change 10mm wire-wound drawdown rods.

Available to produce coatings in the following sizes: 0.4 / 0.6 / 1.0 / 2.0 / 3.0 / 4.0 / 5.0 / 6.0 / 7.0 (mils).

AVAILABLE HANDHELD DRAWDOWN ROD WIRE SIZES:

0.4 MIL Rod = 10.16 microns
0.6 MIL Rod = 15.24 microns
1.0 MIL Rod = 25.4 microns
2.0 MIL Rod = 50.8 microns
3.0 MIL Rod = 76.2 microns
4.0 MIL Rod = 101.6 microns
5.0 MIL Rod = 127 microns
6.0 MIL Rod = 152.4 microns
7.0 MIL Rod = 177.8 microns

Part Number - N008-203 Wire-wound Handheld Drawdown

PRICE QUOTE - email us at sales@epakelectronics.com

Part Number - N008-2031 - Hand Held Drawdown Bar#0.4 MIL

Part Number - N008-2032 - Hand Held Drawdown Bar#0.6 MIL

Part Number - N008-2033 - Hand Held Drawdown Bar#1.0 MIL

Part Number - N008-2034 - Hand Held Drawdown Bar#2.0 MIL

Part Number - N008-2035 - Hand Held Drawdown Bar#3.0 MIL

Part Number - N008-2036 - Hand Held Drawdown Bar#4.0 MIL

Part Number - N008-2037 - Hand Held Drawdown Bar#5.0 MIL

Part Number - N008-2038 - Hand Held Drawdown Bar#6.0 MIL

Part Number - N008-2039 - Hand Held Drawdown Bar#7.0 MIL