These glass insulated, "0-Ohm", gold jumpers are ideally suited for providing interconnections and wiring crossovers in the fabrication of "chip and wire" type microelectronic modules. These jumpers allow for prototype and small quantity circuitry layouts without the need for special conductor patterns.
All MSR and WA series resistors are also available as 0 ohm jumpers.
STYLE |
LENGTH “/mm |
WIDTH “/mm |
THICKNESS “/mm |
PAD WIDTH “/mm |
TOLERANCE |
RESISTANCE |
TJ |
0.045 (1.143) |
0.017 (0.431) |
0.011 (0.762) |
0.010” (0.254) |
±0.002” (0.05mm) |
0.020 Ohm |
J |
0.065 (1.651) |
0.017 (0.431) |
0.011 (0.762) |
0.010” (0.254) |
±0.002” (0.05mm) |
0.025 Ohm |
MJ |
0.100 (2.540) |
0.017 (0.431) |
0.011 (0.762) |
0.015” (0.381) |
±0.002” (0.05mm) |
0.040 Ohm |
DJ |
0.130 (3.302) |
0.017 (0.431) |
0.011 (0.762) |
0.015” (0.381) |
±0.002” (0.05mm) |
0.050 Ohm |
ORDERING INFORMATION (PLEASE ADVISE REQUIREMENTS AND QUANTIY FOR QUOTE OR ASSITANCE) Part Number - TJ SERIES Thick Film Jumpers Part Number - J SERIES Thick Film Jumpers Part Number - MJ SERIES Thick Film Jumpers Part Number - DJ SERIES Thick Film Jumpers Part Number - WAJ SERIES Thick Film Jumpers Thick Film Jumper Datasheet MOQ is typically 25pcs. Price breaks: 25-49, 50-99, 100-249, 250-499, 500-999, 1000-2499, 2500-4999, 5000-9999, 10K+ Samples may be available on request - please contact us with your requirements to check availability.
© 2014 All rights reserved. | Design by TEMPLATED.